Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler!! Enter daily!

N-Fab RSP Front Bumper - Textured Black w/ LED (07-18 Jeep Wrangler JK)

Market Price $711.99 You Save 13% ($93.04)
Our Price

$618.95 (each)

FREE Shipping

  • Item J105881

Will this fit your Wrangler?

Ship to: ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Replacement Front Bumper
    • Welded 1 Piece Construction
    • 3/16-inch Aluminum Skid Plate
    • N-Fab Logo cut-out in Skid Plate
    • Designed for 38” LED light bar
    • Durable 1.75” Steel Tubing
    • Textured Black Powder Coat
    • Limited Lifetime Material Warranty
    • 5 Year Limited Finish Warranty
    • Made in the USA
    • Fits all 2007-2018 Jeep Wrangler JK Models

    Review & Installation Video

    Review & Install Video

    I'm Ryan from, and this is my review and installation of the N-Fab RSP Front Bumper with provision for two LED light bars, fitting all 2007 and up JKs. Today, we are gonna talk through the installation of this bumper which is a very simple one out of three wrench installation. You'll be able to get this installed on your Jeep, in your driveway in about an hour, but we'll talk more about the install in just a second. We're also gonna talk through the construction and a few of the features of this bumper. This bumper is described by N-Fab as a Prerunner style. So, it does have that slanted skid plate on the front like you would see on a Prerunner truck. Which isn't a style that you see a lot on Jeeps. So, this is going to be a unique look. Now, something else that makes this unique is the fact that it's designed to accept not 1, but 2 38-inch LED light bars which is a ton of light. Now, it's not necessary to run two bars or even to run one, but because the bumper is designed for it if you don't have two light bars across the front here, these ears are kind of sticking up and not doing anything. So, in my opinion, if you are gonna purchase this bumper, you are going to run at least one light bar on it. Two light bars is gonna be overkill, in a lot of people's opinions and, to be honest with you, the style of this bumper, because it is so unique, it's not going to be for everyone. But there are those of you out there that are looking for a Prerunner style, stubby front bumper that want this more industrial, hardcore, simple and minimalist look that can accept a couple of light bars. And for those of you, this bumper is a great option. And, moreover, it's one of the only options out there. Again, this is unique, there aren't a lot of bumpers that look like this one does. If there's one thing I can say about this bumper, is that this thing is solid. This is a stubby front bumper but it shows a lot of mass into a small package. This is an inch and 3/4-steel tubing, with steel plate. This is 3/16ths-inch aluminum plate for this kickplate that's on the front here. As you can see, it is etched with the N-Fab logo on the front, and the bumper is also etched with the logo. Those of you who have seen other reviews that I've done know that I don't love having a logo on the front or prominently displayed on my parts, but that's just me. Some of you don't mind it, some of you really like it. N-Fab is really proud of their product, they're proud of being made in the USA, so they want people to know. And they have their logo really big on the front there. Now, even though this is called a skid plate, there isn't much in that area of the Jeep to protect. If you have a Rubicon and you have the electronic sway bar disconnected, of course, that's going to be in that area. But other than that, there's not a lot in that front area to protect. However, that is what gives this bumper a lot of its style. It is what makes it that Prerunner style, so, that's why that's there. Again, if you get the version of this with the winch plate, it does have a cutout in the lower section here for the winch line to go through. Up here you do have these 2 slider holes in the ears that stick up on the bumper and that's for those 2 38-inch LED light bars. N-Fab will tell you that this is designed to accept 38-inch rigid light bars, if you can find any other light bars on the market that aren't 38 inches in length, you could probably install those as well, but this is designed for the rigid light bars. And again, if you put two of them, slider holes would be just the up and down and you can also adjust the tilt of those light bars. You can certainly run one light bar if you'd like. And, there is another version of this bumper that instead of being designed for two light bars, is designed to have individual light pods mounted across the top. So, there's that option as well. In fact, this bumper does have some holes drilled in it, so if you got creative, you could probably mount some light pods on here if you chose to. Like most aftermarket front bumpers, this one's going to install onto your Jeep very easily. The first step is, of course, removing your factory front bumper which you'll do by removing the splash shield and then removing the frame cover. Finally, you'll unclip and unsnap your fog lights, and then remove the eight nuts that are holding your factory bumper in place. Once you remove that bumper, it's a simple matter of lifting this big, heavy bumper onto the frame boards and the included hardware to bolt it on. Now, because this is heavy, having an extra set of hands around won't hurt. However, you won't need any specialty tools to get this done, just your traditional hand tools. Again, I am giving this a one out of three wrenches, and you should be able to get this installed in about an hour. Once the bumper is bolted onto the Jeep, you can go ahead and install whatever light bars you choose to install on it, and, of course, get those wired up. Now, as I said before, this bumper is very solid. It's a very well-built bumper. This is a made in the USA bumper, a solid finish on it, it does have some aluminum on it, which of course, will always drive up the costs a little bit. And as I said before as well, N-Fab is very proud of this bumper. This bumper here is gonna come in at just under $600. And for a stubby bumper, that doesn't accept your factory fog lights, that doesn't have D-ring mounts, that doesn't have any sort of hoop or stinger, it does seem like it's a fairly simple bumper with not a ton of features for that price. However, as I mentioned before, this is a unique-style bumper. So, if you like this style, then this is gonna be a great option for you. As I said before, if I'm judging this base off of build quality, this is built like a tank. It just doesn't quite have all of the features I would like to see on a bumper of this price point. So, if you're looking for a stubby front bumper for your Jeep and you like this Prerunner style with the slanted front skid plate, and you like the ability to run not 1, but 2 38-inch LED light bars, this is going to be a really nice bumper to take a look at if you want great build quality and you have the budget for it. So, that's my review of N-Fab RSP Front Bumper with provision for 38-inch LED light bars, fitting all 2007 and up JKs that you can find right here at

    Serious Durability. Transform your standard Wrangler into an off-roading machine with the N-Fab RSP front bumper installed. This simple bumper modification offers additional front-end coverage and a cool aggressive look that's impossible to ignore. The bumper comes with a large skid-plate, tough steel construction and a light mount for an accessory light bar. It gives you more strength and versatility so you can get more done with your Jeep.

    38"" Light Bar. This N-Fab RSP front bumper comes with a built-in mount location for a 38"" LED light bar that you have to add on your own. It makes adding accessory lighting quick and easy to do.

    Serious Strength. N-Fab uses 1.75"" steel tubing for the structural frame of this bumper, giving it awesome strength to withstand serious impacts. The bumper tubes are powder coated for corrosion resistance as well. The skid plate itself is made from 3/16"" aluminum for a lightweight cover that will keep debris and small rocks out capably while defending against moisture as well.

    Straightforward Installation. Some bumpers are complicated to put on, not this one. It installs in just two hours from beginning to end. It bolts on with standard mounting hardware that comes with the kit.

    Lifetime Protection. This N-Fab bumper is protected for life against material issues. It's also safeguarded for five years against finish defects that could lead to corrosion.

    Application. This N-Fab RSP Front Bumper with LED light bar mounts is specifically designed as a replacement front bumper for 2007-2018 Jeep Wrangler JK Models.

    Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.

    Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

    MPN# J072LRSP

    CA Residents: WARNING: Cancer and Reproductive Harm -

    What's in the Box
    • (1) Replacement Front Bumper
    • (1) Skid Plate
    • Mounting Hardware
    Installation Info
    Tech Specs

    You Might Also Like

    Customer Photos

    More Products You Might Like

    Q & A

    No questions about this product yet.

    Ask the First Question

    Recommended For You

    Customer Reviews (1) Write a Review

    Overall Rating 5

    out of 5 stars

    • Fit 5 5
    • Appearance 5 5
    • Bang For Your Buck 5 5

    • 5/5

      January 11, 2017


      Good bumper. Love the look and feel of the nfab rsp


      Year: 2016Submodel: Wrangler

      Helpful (5)

    Related Wrangler Categories