Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $15,000!! Enter Now

MORryde Hi-Lift Jack Carrier for Heavy Duty TailGate Hinges (07-18 Jeep Wrangler JK)

Item J104173
ExtremeTerrain no longer carries the MORryde Hi-Lift Jack Carrier for Heavy Duty TailGate Hinges (07-18 Jeep Wrangler JK). Please check out Jeep Jacks & Recovery Accessories for an updated selection.

    Review & Installation Video

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation


    • Hinge Jack Mount
    • Smooth Black Powder Coat Finish
    • Easy Installation
    • Includes Hardware
    • For MORryde's Heavy Duty TailGate Hinge Set
    • Fits 2007-2018 Jeep Wrangler JK Models


    Off Road Ready. The MORryde Hi-Lift Jack Carrier is made for those heading off road who are seeking a simple and easy way to mount a recovery jack. It is designed to work directly with MORryde's Heavy Duty Hinge Set for impressive durability through the bumps and jolts of off road travel. It provides easy storage of your off-road jack in a vertical position that will maximize storage space on your Wrangler.

    Durable Construction. Similar to the Heavy Duty Hinges, this Jack Carrier features a full metal construction designed to handle the rigors of the trail. It is finished in the same tough, black powder coat finish to complement your hinges while providing superior corrosion and rust resistance.

    Easy Installation. This JK accessory mount installs easily and includes all the necessary hardware for a quick and painless upgrade. It mounts directly to MORryde's hinge set and no additional modification or drilling is required.

    Application. The MORryde HI-Lift Jack Carrier is a direct fit for MORryde's Heavy Duty TailGate Hinge set when installed on 2007-2018 Jeep Wrangler JK Models.

    Fitment: Details

    CA Residents: WARNING: Cancer and Reproductive Harm -


    Customer Reviews (15)

    Write a Review

    Ratings Summary

    3.5 out of 5 overall rating from 15 customers

    • June 03, 2019

      5 2016 Wrangler - HHM

      Good Fit Fair Price

      Easy to install, get's the job done and holds my Hi Lift Jack in place without major rattles. Used the available neoprene jacket to protect the lower part of the jack, which in turn eliminated all rattles. Nice part - woul dbuy again!

      Helpful (0)
    • August 04, 2018

      3 2016 Rubicon - JosephW


      I think the product was a bit overpriced for what it was. Any welder could make one with little to nothing. I was disappointed there is no way to secure the lower jack to the mount and wanted it to able to lock it down to avoid theft. Was expecting a thicker gauge metal.

      Helpful (5)
    • February 19, 2018

      3 2008 Rubicon - Kdub

      Ok, but I had a few issues.

      I got this because I also have the hinges and reinforcement tail kit. The top bolt didn't line up well with any of the holes in my high lift... which I get all brands might have slightly different. But the main issue was the top bracket wasn't close to the high lift. Or the bolt wasn't long enough. Anyway trip to the hardware store $4 later I made it work.

      Helpful (6)
    • February 02, 2018

      2 2012 Wrangler - NickD

      Jack carrier

      The only thing wrong with this product is it's over priced

      Helpful (7)
    • January 23, 2018

      4 2013 Rubicon - KennethD

      Does the job very sturdy

      I really like the MorRyde products, very strong and the HD hinges give my rig a nice look. I have the whole tailgate set up, HD hinges, HD tire carrier and HD reinforcement, adding this Hi-Lift Jack Carrier was a no brainer. I would've given it 5 stars, but I was missing some hardware that was essential for the install before my big off-road trip, so that was a bummer, but XT was fast in sending me replacement hardware so I can finish my install. Other than that, I am very happy with this, my hi-lift jack has no fit issues.

      Helpful (6)
    • December 16, 2017

      5 2008 Wrangler - Burroman

      Don't forget the hinges

      I upgraded to the Myoryde HD hinges and installed this Hi-Lift carrier at the same time. Great location for access in tight trail spots.

      Helpful (7)
    • September 13, 2017

      2 2015 Rubicon - TheCrazyFoolFromNH

      A bit disappointed

      I previously asked whether fitment with particular brands of hi lift jacks would be an issue. After being informed that size was no longer an issue, I ordered the morryde mount with the Red rock hi-lift Jack. Needless to say the Jack baseplate is too large and fitting without forceful wedging doesn't seem to be an option.

      Helpful (6)
    • August 24, 2017

      5 2016 Wrangler - JohnC

      Must Have !!!!!!

      This is a great product except it doesn't really fit the Jack Base but nothing a lil bang from a hammer couldn't fix..Holds the jack super tight once it's bolted in the Jack Handle makes some noise but bungee cords tighten it right up...

      Helpful (7)
    • July 14, 2017

      1 2015 Wrangler - Wesley


      Was super excited for this mount. Easy to install and looks great. But the only negative I have is the base is too small to fit a jack. Always a constant rattling sound.

      Helpful (7)
    • June 04, 2017

      4 2013 Rubicon - MontyCG

      Great Addition

      This was an extremely easy install and works very well! It has built in adjustability. I have a 35" tire hanging back there in the center of the tailgate and there is no interference whatsoever. The gate opens without any interference or worry about hitting the paint of the Jeep. I love this product, but feel that it is just a bit overpriced.

      Helpful (7)

    Questions & Answers (10 answers)

    5 Top Rated Questions

    SO does this fit with a HI Lift brand jack or not? Why is there confusion on this?

    • The MORryde Hi-Lift Jack Carrier for Heavy Duty TailGate Hinges in regards to the Hi Lift Jack carrier. MORryde has addressed those issues. Early production models didn’t fit some of the stamped base plates. They have since made some adjustments, and the jack carrier will now fit all Hi-Lift jack products.

    Helpful (1)

    Would this work with a Harbor Freight 42" Farm Jack?

    • This is designed to fit with the Hi-Lift jacks only and has not been tested on other jacks.

    Helpful (0)

    I have already installed the heavy duty hinges and tailgate reinforcement by morryde. Do I have to unbolt all that and reinstall it to add the jack mount or does it bolt on without having to disassemble and reassemble what I already did?

    • You will need to remove some of the hardware for the lower reinforcement.

    Helpful (0)

    Is it possible to mount a 5 gallon Wavian jerry can on this carrier? What are the dimensions?

    • The MORryde Hi-Lift Jack Carrier for Heavy Duty TailGate Hinges will not be large enough to fit a 5-gallon jerry can. This is specifically for use with a hi-lift jack.

    Helpful (0)

    Will a 5 gallon Wavian Jerry can also sit on this hi-lift mount?

    Post Your Question
    5 More Questions
    Will this jack mount work with the MORryde TJ tailgate hinges JP54-025? If not where is the correct mount for a TJ? 1 answer
    can this carrier be locked with a lock? 1 answer
    Reviews suggest that this is not universally compatible with most hi-lift jacks, what are some models that are compatible? 1 answer
    Will the MORryde HI-lift jack carrier fit factory Hinges? 1 answer
    Will this work on the factory hinges? 1 answer

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Jack Mount
    • Hardware

    Tech Specs

    Will It Fit My Wrangler

    • JK Rubicon 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
    • JK Rubicon 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
    • JK Wrangler 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
    • JK Wrangler 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18

        Related Wrangler Categories