Customer Reviews (14) Write a Review

Overall Rating 3.4

out of 5 stars

• Fit 3.571429 3.6
• Bang For Your Buck 3.5 3.5

• 3/5

  August 04, 2018

  Okay.

  I think the product was a bit overpriced for what it was. Any welder could make one with little to nothing. I was disappointed there is no way to secure the lower jack to the mount and wanted it to able to lock it down to avoid theft. Was expecting a thicker gauge metal.

  JosephW

  Year: 2016Submodel: Rubicon

  Helpful (0) Thanks for your input!

  • Fit 4

    4

  • Bang for your Buck 3

    3
• 3/5

  February 19, 2018

  Ok, but I had a few issues.

  I got this because I also have the hinges and reinforcement tail kit. The top bolt didn't line up well with any of the holes in my high lift... which I get all brands might have slightly different. But the main issue was the top bracket wasn't close to the high lift. Or the bolt wasn't long enough. Anyway trip to the hardware store $4 later I made it work.

  Kdub

  Year: 2008Submodel: Rubicon

  Helpful (2) Thanks for your input!

  • Fit 2

    2

  • Bang for your Buck 3

    3
• 2/5

  February 02, 2018

  Jack carrier

  The only thing wrong with this product is it's over priced

  NickD

  Year: 2012Submodel: Wrangler

  Helpful (3) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 1

    1
• 4/5

  January 23, 2018

  Does the job very sturdy

  I really like the MorRyde products, very strong and the HD hinges give my rig a nice look. I have the whole tailgate set up, HD hinges, HD tire carrier and HD reinforcement, adding this Hi-Lift Jack Carrier was a no brainer. I would've given it 5 stars, but I was missing some hardware that was essential for the install before my big off-road trip, so that was a bummer, but XT was fast in sending me replacement hardware so I can finish my install. Other than that, I am very happy with this, my hi-lift jack has no fit issues.

  KennethD

  Year: 2013Submodel: Rubicon

  Helpful (2) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 5/5

  December 16, 2017

  Don't forget the hinges

  I upgraded to the Myoryde HD hinges and installed this Hi-Lift carrier at the same time. Great location for access in tight trail spots.

  Burroman

  Year: 2008Submodel: Wrangler

  Helpful (3) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 2/5

  September 13, 2017

  A bit disappointed

  I previously asked whether fitment with particular brands of hi lift jacks would be an issue. After being informed that size was no longer an issue, I ordered the morryde mount with the Red rock hi-lift Jack. Needless to say the Jack baseplate is too large and fitting without forceful wedging doesn't seem to be an option.

  TheCrazyFoolFromNH

  Year: 2015Submodel: Rubicon

  Helpful (2) Thanks for your input!

  • Fit 1

    1

  • Bang for your Buck 4

    4
• 5/5

  August 24, 2017

  Must Have !!!!!!

  This is a great product except it doesn't really fit the Jack Base but nothing a lil bang from a hammer couldn't fix..Holds the jack super tight once it's bolted in the Jack Handle makes some noise but bungee cords tighten it right up...

  JohnC

  Year: 2016Submodel: Wrangler

  Helpful (3) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 1/5

  July 14, 2017

  Helpful

  Was super excited for this mount. Easy to install and looks great. But the only negative I have is the base is too small to fit a jack. Always a constant rattling sound.

  WesleyD

  Year: 2015Submodel: Wrangler

  Helpful (3) Thanks for your input!

  • Fit 1

    1

  • Bang for your Buck 3

    3
• 4/5

  June 04, 2017

  Great Addition

  This was an extremely easy install and works very well! It has built in adjustability. I have a 35" tire hanging back there in the center of the tailgate and there is no interference whatsoever. The gate opens without any interference or worry about hitting the paint of the Jeep. I love this product, but feel that it is just a bit overpriced.

  MontyCG

  Year: 2013Submodel: Rubicon

  Helpful (3) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 3

    3
• 5/5

  April 17, 2017

  Does it's job

  This is definitely a little pricey for what you get, but it mounts up perfectly and holds my HiLift rattle free. I didn't have any issues with the base of my jack fitting in the mount as others have. I was prepared to have to grind it down a little to make it work but it fit perfectly into place. Overall I would definitely recommend this as it works great with the hinges but I don't think it should be priced at more than $50.

  Jordan89

  Year: 2013Submodel: Wrangler

  Helpful (5) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 3/5

  March 10, 2017

  Dont use if your tire is over 35" dia

  Product quality ok base is to small for the jack I had and my 37" tire hits it and had t shim tire out.

  MarkW

  Year: 2017Submodel: Wrangler

  Helpful (5) Thanks for your input!

  • Fit 1

    1

  • Bang for your Buck 3

    3
• 1/5

  January 23, 2017

  Horrible fit

  The jack that was made for this mountain didn't fit

  Jim

  Year: 2012Submodel: Wrangler

  Helpful (7) Thanks for your input!

  • Fit 1

    1

  • Bang for your Buck 1

    1
• 4/5

  August 05, 2016

  Excellent carrier for your hi-lift jack!

  Fits perfectly when paired for the MORryde hinges. The only issue that we had was it does not work with the Barricade Rear Tire Carrier. Otherwise, great product!

  Cannon

  Year: 2013Submodel: Wrangler

  Helpful (4) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  July 12, 2016

  Amazing

  Bolts right on in to place on the heavy duty brackets no diffrence in weight of truck cant even tell its there

  Jeepguy2016

  Year: 2016Submodel: Wrangler Unlimited

  Helpful (5) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5