Review & Install Video
I'm Ryan from extremeterrain.com and this is my review of the Off Camber Fabrications by MBRP Formed Front Light Bar for all 2007 to 2016 JK's that have an Off Camber Fabrications front bumper. Today we're going to talk about the construction and of course the installation of this light bar. This is for those of you running an Off Camber Fabrications full-width or stubby front bumper either with or without the winch mount that don't currently have a way to mount lights onto that bumper. Off Camber Fab gives you the option of purchasing this formed light bar which is designed to accept a 20-inch LED light bar and bolt right up or a more traditional bumper hoop that has two light mount tabs on it. That's going to be for those of you who are interested in running two separate lights and not a light bar.
Now, either way you decide to go, both of those light bars are available in two different finishes, either the Line-X finish that you see here or a more traditional black powder coat. Now the nice thing about these light bar mounts is that they are designed to bolt right onto those Off Camber Fabrication bumpers, but they are a little bit more expensive than some of the other light bars and light bar mounts that you might find on the market. This light bar mount is made of steel and this version is the one that comes right out of the box with the Line-X finish. As I mentioned before, this is also available with the more traditional black powder coat finish, but if you have the Line-X bumper, this will match very well.
The Line-X is a little more expensive than the powder coated option, but this is going to hold up any trail obstacles that you can throw at it. As I mentioned, this light bar mount is designed to accept most industry-standard 20-inch LED light bars, and in order to do that, it has quite a few holes drilled right in the bottom of it so it's ready to accept any light bar that you might want to bolt on to it. It also comes with all the hardware that you need to get it bolted onto your bumper and it also comes with these foam rubber gaskets, which are really nice because they go between the light bar in the bumper, keeping everything from chafing and rubbing the paint off. Of course, if the paint were to rub off you could get some rusting, although with the Line-X version I don't think that is going to be a problem. Like I said before, this is designed specifically to work with the Off Camber Fabrication front bumpers, either stubby or full-width. So, this is going to be bolt-on installation and it does not get any easier than this.
Everything that you need to get it installed comes right in the box. You won't have to drill any holes or get anything welded. This whole installation process shouldn't take you more than a half an hour with traditional hand tools. Simply take this out of the box, open up your hardware package, set the light bar on top off the bumper aligning the mounting holes and drop the bolts through the holes. If there is a difficult part about this, it's getting the nuts on the backside of those bolts, because you do have to reach inside the bumper. But it's not that difficult, anyone can do it. Now as far as just a light bar mount goes, this one is a little bit expensive and when you also figure that Off Camber Fabrication gets top dollar for their bumpers, between the bumper and the light bar set up you're going to have quite a few dollars wrapped up in it, especially if you go with the Line-X version because that is a little bit more than the powder coat.
However, if you already have the bumper and you are looking for a light bar that's going to bolt right on, this is really your only option. And for ease-of-installation and to make sure that the finish is going to match perfectly, this is worth a few extra dollars. So if you currently have an Off Camber Fabrication front bumper and you are looking for a way to mount a 20-inch LED light bar, this is going to be the simplest installation and going to give you the cleanest look possible. So that's my review of the Off Camber Fabrications by MBRP Formed Front Light Bar fitting all 2007 to 2016 JK's, that you can find right here at extremeterrain.com.
The advanced LINE-X corrosion resistant finish can't be damaged by most acids and solvents, which adds significant life expectancy to your vehicle's equipment. Due to it being completely water tight and offering tensile strength up to 6,600 psi, you can expect it to stand up to even the toughest elements and road hazards. Rigorously Tested.
Off Camber Fabrications is known for its premium quality and unique design. You can rest assured that this Formed Front Light Bar for OFC Bumpers has been tested extensively in even the toughest environments. Simple Compatibility.
This 12ga steel Formed Front Light Bar features universal light mounting holes that fit industry standard 10" light bars and up to four traditional round lights. It is easily installed using basic tools and the included hardware. Application.
The Off Camber Fabrications by MBRP Formed Front Light Bar For OCF Bumpers is designed to be installed on the 2007-2018 Jeep Wrangler JK.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- What's in the Box
- (1) Formed Front Light Bar for OFC Bumpers
- Mounting Hardware
- Installation Info
Installation Time: (approx) 30 Minutes
Difficulty Level:Simple installation for anyone
- Tech Specs
- Will it fit my Wrangler?
- JK Rubicon 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Rubicon 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Wrangler 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Wrangler 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18