(approx) 1 Hour
Simple installation for anyone.
$1,094.99 (kit)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Construction. Get complete protection with the MBRP Off Camber Fabrications full width front bumper package. 7 Gauge steel plating makes up the bumper while tubular 3 inch steel is used to make the protective light bar. Heavy duty black powder coating masks the package, giving it an aggressive, great looking and long lasting finish for your bumper and light bar combination.
Specs. The package weighs in at 118 pounds and is available with a winch (a href="//www.extremeterrain.com/mbrp-front-full-width-winch-JK-131174.html" title="Off Camber Fabrications Front Full Width Winch Bumper Package">Off Camber Fabrications front full width winch bumper package). The purpose of this package is to give your JK's frame and grille extreme protection.
Accessories & More. Optional D-rings from OCF can be purchased and used with this package. Supports (2) 8 inch off-road lights and uses OEM fog lights, if desired.
Application. Fits 2007-2018 JK Wrangler models.
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 18, 2019
This bumper was installed on my JKU when I bought it. MSRP is $900 yet trying to resale it for $200 has been tough. Seems everyone wants a winch mount, including me. This bumper is solid and sturdy so its not the worst on the market, not sure if its worth the asking price if you buy it new though.Helpful (1)
April 18, 2019
Off Camber light bar
The product is made in China. Seems sturdy. We had to cut a piece off the old vacuum pump housing so the bar hardware would fit. Didn't say that in the instructions. Looks good going down the road. Took around 3 hours to install. If you don't have a lot of mechanical knowledge I suggest you find someone who does. We had to cut a hole in the plastic piece in between the bumper and grill. Didn't say that in the instructions either. Had to remove the bumper. I like it because it covers most of the grill.Helpful (2)
January 18, 2019
Off Camber frabrications grill guard
Unfortunately this product does not fit all aftermarket bumpers. Despite the description saying it should. We returned it amd will keep looking.Helpful (4)
April 09, 2018
Much harder to install than originally thought however looks greatHelpful (14)
April 11, 2017
Makes it look aggressive
Nice upgrade without having to change the bumper. Easy install. Only hard part was relocating the vacuum pump.Helpful (16)
December 26, 2016
Easy ibtallation /great fit/super tough bumper //best bang from tor the buck ....bar noneHelpful (13)
June 21, 2016
Wasn't a big fan of it but I got it as a gift so I put it on! Looked great TBH. But I was just eh about it. Gave my jeep a nice clean look.Helpful (12)
March 13, 2015
Looks great hard to install
Looks great on the jeep. Had to disassemble the hole front end of the jeep and relocate the vacume pump and cut the bracket off the frame just for a light bar.Helpful (18)
November 07, 2014
Strong, durable, hard to install
Very happy with the final product. Very strong, thick and sturdy. Installation was extremely troublesome. I have a 2015 and the vacuum under the front bumper had to be relocated about 4 inches over to allow for the right side bracket to fit correctly. Overall it was worth the time but be warned for 2015 JKU owners that it will require some time.Helpful (17)
September 19, 2014
Worth the wait
First of all once installed it looks fantastic. The process of installation was a pain in the butt.....my poor husband had to buy a bigger electric cutting tool to cut the bar. Also we did research first about installing this bar and lucky we ordered a vacuum pump relocator as we didn't know this either. It would've also delayed the whole installation process. The whole thing (just installation) took about 5 hours!!! My husband did everything 'properly' including doing a good job sanding down the holes that needed to be cut in the front bumper section. If you know what you're doing expect a few hours at least to install, or best thing would be to get someone to install for you. I noticed there's a tiny rust dent starting but a little black touchup paint will fix.Helpful (17)
Can this go through a car wash?
The Off Camber Fabrications by MBRP Front Light Bar/Grille Guard System is strong enough to support the pressure produced by an automatic car wash.
Will this product fit a Sport Wrangler 2017 Jeep stock bumper?
The Off Camber Fabrications by MBRP Front Light Bar/Grille Guard System will work with the stock Jeep bumper.
Will this fit any stubby or mid width bumper? Or do you have any to recommend? Thanks
The Off Camber Fabrications by MBRP Front Light Bar/Grille Guard System is designed as a universal part that will with most aftermarket bumpers, as well as stock bumpers.
Is there a matching back bumper
Hello, yes we do have 2 Matching Rear Bumpers to this front one, you can use this one: http://www.extremeterrain.com/mbrp-rear-full-width-bumper-jk-131095.html or this one: http://www.extremeterrain.com/mbrp-rear-full-width-bumper-jk-131177.html
I got a grill guard for Christmas but it didn't fit my front bumper. I just have a normal 2013 Jeep Wrangler bumper with no upgrades to it. Would I need to get a whole different bumper to be able to get a front grill guard, or are there some that would fit my bumper????
Some special edition Wranglers feature an upgraded bumper which this product will not be compatible with. If you have the original factory plastic bumper you will need to do some disassembly. You will need to remove your frame cover, splash guard and even your grille. From there you will need to relocate your vacuum pump. This will then install onto the frame horns. Once you have installed the brackets you can put your grille back on the vehicle and continue the install. Once fully installed you will no longer be able to utilize your frame cover however your splash guard should go back on without issue.
Hello, yes, this will work with the stock bumper.
The vacuum pump requires relocation on all 2012-2015 JK models.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box