Light to Moderate mechanical skill required.
$399.99 (each)FREE Shipping
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
This MBRP Black Series Cat-Back Exhaust system for your 2007-2011 4-door JK is going to be for those of you that are looking to maintain the single outlet exhaust system, but give you a lower exhaust note and additional exhaust volume. This system is going to be a little bit less expensive than some of the other ones on the website because this is a system that's made of aluminized steel that's covered in this high-tech black coating instead of being a stainless system, so it will save you a little bit of money while still giving you that lower exhaust note and additional volume. Now, if you are looking for a system that's a little bit more high clearance, MBRP does offer a system that will relocate the muffler from the back of the Jeep here to an area closer to the catalytic converters, almost in the same area that the factory resonator is in on the newer JKs, so you have a little bit less stuff to bang up on with rocks. So, if you are somebody who goes off-road a lot and you're considering having a little bit higher clearance, that can be a good system to look at. As it says in the name, this is a Cat-Back system and it is going to replace all of the piping and your muffler from the catalytic converters all the way to the back of the Jeep. This system does come in a couple of different pieces which will make it easier to get it installed on your JK. So, you are going to have your extension pipe, your over axle pipe, your muffler, of course, and then your tail pipe. This system is going to be a steel system covered in that high-tint black coating. This is 16-gauge steel. The tip itself is a 304 stainless. That's also covered in that same high-tint black coating. This is going to utilize all of your factory exhaust hangers so there is no major modifications to the jeep necessary to get this installed and it will come with all the clamps that you need to get everything installed. This is going to be a one out of three wrench install that will take you right around an hour to complete. If you do have some rust on your '07 to '11 JK, make sure you spray everything with a good penetrating oil well before you get started, including all those factory hangers. That's going to make it a lot easier to get this thing installed. Exhaust systems are notoriously rust magnets, so spray everything. It will definitely help.Now, the first step in this install is going to be removing all of the factory piping from the catalytic converters back and you can do that by removing the factory clamps, the factory hangers and then just prying, pulling, jiggling, whatever you need to do to get that factory system apart. Again, this can cause a little bit of a headache, but if you spray everything ahead of time, it will definitely help. Then you can go ahead and start to install your new system. First, you'll install the extension piping to the catalytic converter collector pipe and that does have a hanger on it. Of course, using the clamp that's included. That will go into your over axle pipe which will lead into your muffler section. And finally, your tail pipe and your tip. You can leave all of your clamps loose until you get everything aligned exactly how you want it. Then go back through starting at the front, working your way to the back and tighten down all of your clamps. Like I mentioned, this is going to be a $375 Cat-Back system. This is the least expensive single outlet system that we offer on the site that includes all of the piping that this one does. Now, because this isn't going to be a stainless steel system, you do have to worry if you live in the rust belt about rotting. However, this does have that high-tint black coating which is definitely going to help keep the longer life in the exhaust system. So, if you want a lower exhaust note, you want a little bit more exhaust volume, you like the blacked out look, but you don't have a big budget for exhaust, I think this one is worth looking into. So, if you're looking for a budget black single outlet exhaust system, I think the MBRP Black Series Cat-Back is a good option for you and you can find it right here at xtremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Construction. MBRP's Black Series is designed to withstand rigorous conditions on and off the road, and this system's high temperature black coating fends off corrosion and contains heat within the exhaust. 2.5 inch diameter, 16 gauge tubing features Mandrel bends calculated to precisely enhance horsepower and torque. The system is fabricated from stainless steel, as are the 4 included band clamps, which provide a snug fit. The T304 stainless tip is removable.
This Black Series exhaust system combines precisely balanced performance, a handsome look, and deep throated yet melodious engine notes. The muffler mounts high for maximum clearance while rock crawling, and its chambered design makes it highly water resistant.
Application. MBRP backs this system with a three year warranty. This system fits the 2007 - 2011 4 door, JK Wranglers.
Fitment: 2007 2008 2009 2010 2011 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Light to Moderate mechanical skill required.
What's in the Box
10 More Questions