(approx) 10 Minutes
Simple installation for anyone.
$149.95 (kit)FREE Shipping
Ryan: The Lange Hoist-A-Cart door storage and freedom panel storage accessory is for those of you that have any Lange Hoist-A-Cart that are looking for a way to also store your freedom panels on those newer Jeeps and your doors on the cart. This is going to give you a bolt-on way to accomplish that so you don't have to purchase something separate, fabricate something for the freedom panels, have something hanging off of your wall. That way, everything is self-contained, right on the cart for you. This is going to be a very, very simple one out of three wrench installation. This does bolt directly onto that cart. Everything just snaps together. Very, very simple but we'll talk a little bit more about that in just a second. So if you have the Lange Hoist-A-Cart, you have yourself set up to be able to remove your hard top with one person, just by yourself. You don't need to call a friend. You don't need to have help and you also don't need to have a specific garage ceiling height. That cart can be used at any ceiling height, even if you were outside and you don't have a ceiling, whatever the case might be there. So this is going to give you the ability to not just remove and store the top but also take the freedom panels, have a spot to store those and the doors as well, keeping everything nice and safe and everything all together. If you already have that cart, I think that this is a pretty fairly-priced investment for all the additional functionality that you get. This is going to be really well built. It's going to be steel. It is the quality that you have come to expect from Lange. It's all very well built. It has a nice hammered powder coat finish on it, so it's going to be very resilient. It's going to hold up really well. It's going to look pretty good, as good as you would need your door and freedom panel holder to look. It does come with the pads, so you're not going to scratch anything. Everything really just snaps or bolts together right onto that cart, making for a very easy install. This door and freedom panel holder will run you right around $150 and I do think that's fair for what you're getting here. Everything snaps together, it's going to hold everything in one spot, keep it nice and safe, no scratches, no dents, no dings. I do that think that if you have that Hoist-A-Cart, this is a very nice addition and I think it's one that is also fairly priced. And now, a member of the install team will show you how to get this installed on your Hoist-A-Cart. Man: First thing you're going to want to do is remove the two 14-millimeter nuts and bolts on each side of your support rod. Once you have both bolts and nuts removed, you're going to set them aside in a safe location because they will be reused later. Once you have your bolts out, you're going to go ahead and remove the caps on the ends of the two rails. Now that we have our bolts and caps removed, we're going to go ahead and install the support brackets. Now before you do this, you want to make sure you have your spring clip pointing outward. Now that you have your support brackets installed, you're going to go ahead and reinstall the two bolts and nuts you removed earlier. Do not tighten them down at this time. You're going to do that at the end. Now that you have your support bracket installed, you're going to go ahead and install the main bracket. When putting this on, you want to make sure your spring clip lines up with the hole on your main bracket and clips into place. Next, you're going to want to go ahead and install your support arms. They're going to clip right into your main bracket. Next, you're going to want to go ahead and install your protective foam over the arms. Now that we have everything assembled, we're going to go ahead and tighten up the two 14-millimeter nuts and bolts. And that wraps up our review and install. You can check out more at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Specs & Installation
Extra Storage Capacity. When you remove your doors from the 1987-2020 Jeep Wrangler YJ, TJ or JK you'll need somewhere to store them so they don't fall on the garage floor. The Lange Hoist-A-Cart Door Hanger Freedom Top Storage is a durable mount with tiny footprints that will ensure both of your doors stay safe from damage until you're ready to put them back on the Jeep.
Construction. The Lange Hoist-A-Cart Door Hanger and Freedom Top Storage consists of a rugged steel frame, gear winch, and heavy duty swivel casters.
Optional Extras. Accessories are available for two- and four-door models of 1987-2020 Wrangler YJ, TJ, JK and JL that let you store your doors, top and Freedom Top pieces in one convenient location.
Installation. No drilling required. The Lange Hoist-A-Cart Door Hanger and Freedom Top Storage is easy to assemble using simple hand tools.
Guarantee. If you are not completely satisfied with the Hoist-A-Cart Door Hanger and Freedom Top Storage, Lange will refund the purchase price up to 30 days from the date of purchase, no questions asked.
Application. The Lange Hoist-A-Cart Door Hanger and Freedom Top Storage has been designed, engineered and manufactured to work with all models of 1987-2020 Jeep Wrangler YJ, TJ, JK and JL.
Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
July 23, 2019
Parts assembled good works very well. Rubber cushion could be betterHelpful (0)
July 20, 2019
Works well....very stable. No issues supporting the doors at all.Helpful (0)
March 03, 2018
Solid and reliable
I have not purchased this yet, but I have a friend who has used it for a long time now. It's a great hoist and very sturdy.Helpful (7)
No questions about this product yet.Ask the First Question
(approx) 10 Minutes
Simple installation for anyone.
What's in the Box