Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!

Hyline Offroad One Piece Hood Louver - Semi-Gloss Black (13-18 Jeep Wrangler JK)

ExtremeTerrain no longer carries the Hyline Offroad One Piece Hood Louver - Semi-Gloss Black (13-18 Jeep Wrangler JK). Please check out 2007-2018 Jeep Wrangler JK Hoods & Hood Accessories for an updated selection.

Features & Details

  • Vents Heat from the Engine Bay
  • Forged from a Single Piece of Aluminum
  • Built-in Flush Head Threaded Studs
  • Semi-Gloss Black Powder Coated
  • One-Year Limited Warranty
  • Made in the U.S.A.
  • Fits 2013-2018 Wrangler JKs with Dual Windshield Washer Squirters
Increased Performance. This hood louver from Hyline Offroad won't just give your Wrangler JK a customized look, it's also fully functional. Its vents channel hot air away from the engine bay, keeping your motor cooler and running at a higher level, especially during stressful rock crawls or extended off-road applications.

Built Tough. Proudly made in the U.S.A., the Hyline Offroad Hood Louver is forged from a single piece of aluminum. Hyline Offroad gives you a one-year limited warranty with all their hood louvers.

Installation. While the installation requires some cutting and drilling, Hyline Offroad includes a simple-to-use template to guide the process. Just lay the template over the hood and drill your holes and make cuts where indicated. The built-in threaded studs are flush, so you're ensured a nice fit.

Application. This Hyline Offroad One Piece Hood Louver is designed to fit any Jeep Wrangler JK with Dual Windshield Washer Squirters made between 2013-2018 including 2-door and 4-door models.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Single-Piece Hood Louver Panel
  • (1) Steel Template
  • (38) Nylon Locknuts
  • (2) 10-32 Pan Head Screws
Installation Info
Tech Specs
Will it fit my Wrangler?
  • JK Rubicon 2 Door - 13, 14, 15, 16, 17, 18
  • JK Rubicon 4 Door - 13, 14, 15, 16, 17, 18
  • JK Wrangler 2 Door - 13, 14, 15, 16, 17, 18
  • JK Wrangler 4 Door - 13, 14, 15, 16, 17, 18

    Customer Photos (4) Submit Your Photo

    View All 4 Photos

      Questions & Answers (1)

      1 Top Rated Question

      Trying to decide between Hyline and Spyder louvers and currently leaning towards Hyline since there does not appear to be any logo vs. the spyder logo. Any other things that should stand out, quality-wise i.e. rust proof, fading, etc.?

      • Both of the louvers are pretty nice and well made, I have not heard of any fading or rusting of either one of these hood louvers. I personally like the non-logo version myself, but it really comes down to personally preference.

      Helpful (2)
      Post Your Question

        Customer Reviews (4) Write a Review

        Overall Rating 4.8

        out of 5 stars

        • Fit 5 5
        • Bang For Your Buck 4.5 4.5

        • 5/5

          November 21, 2018

          Great Fit / Looks Awesome

          Excellent directions and template. I used a grinder with a cutting wheel and a hand drill. Buy extra small drill bits for the pilot holes. Careful to not over tighten the pressed fittings.


          Year: 2013Submodel: Rubicon

          Helpful (8)

        • 5/5

          April 04, 2018

          Just put it on. Looks great

          I had the same issue with the screws as another reviewer, also was sent the wrong template so it was a little of a guessing game. Luckily one of the customer photos showed where he cut out the hood. Overall it looks great and and serves as a very functional addition to your jeep, especially when towing your boat


          Year: 2013Submodel: Rubicon

          Helpful (10)

        • 4/5

          September 29, 2017

          My 2017 purchase of Hyline Hood Louver

          The instructions are great. The template, you CANT go wrong. First time doing something super drastic to my hood. I would definitely recommend a Dremel with the metal cutter. The wheel is thiner and cuts a lot faster with more control. One thing I didn't really do was mark where the support is for the hood and ALMOST cut it completely off. The wheel I used was a 4" and you couldn't really cut through because it's thick. It almost melted the hood metal instead of cut which is why I recommend the Dremel. I did have some issues with the screws this comes with, as soon as I began to tighten the nut, the screw spun with the nut and there really isn't a way to hold on to the screw because it comes attached to the louver to give it a sleek look. That happened with 4 nuts. Besides that, it was an easy install and fun. I gave it a 4 star because of those loose screws.


          Year: 2013Submodel: Wrangler

          Helpful (10)

        • 5/5

          June 05, 2017

          Vents really function well!

          Install was easy, the steel template pretty much eliminates any chance of messing up the hole placement. There are a lot of bare steel edges after all the cutting and drilling. I put two coats of primer and one coat of paint on everything. I also put a thin bead of black RTV sealant around the perimeter to help seal it to the hood. It looks great, lays perfectly flat on the hood and lets so much heat out. Before the vent I could barely hold the prop rod, now its only warm so the under hood temperatures are much lower.


          Year: 2017Submodel: Rubicon

          Helpful (11)

        Related Wrangler Categories