Power and Protection.
Ideal for recovery operations, this Barricade Extreme HD Stubby Front Bumper and 9,500 lb. Winch Combo Kit will help you free yourself, or a friend from the messiest of situations. The Barricade Extreme HD Stubby Front Bumper is designed for superior clearances and protection, while the Winch will provide you 9,500 lb. pulling power. This Barricade Combo Kit is perfect for both the novice and seasoned off-roader.Extreme HD Stubby Front Bumper.
Built to last, Barricade manufactures their Extreme HD Stubby Front Bumper from 3/16" mild steel plating with a 2" tubular steel over rider bar. The heavy duty D-Ring mounts are welded on both the inside and the outside for additional strength. Barricade then completes the entire Bumper in a rugged two stage finish, using epoxy pre-coating and a high-grade textured black powder coating. As an added bonus, this Extreme HD Stubby Bumper also features integrated light mounts, located on the over rider bar, that allow you to install two auxiliary lights. Lights are not included - sold separately.Heavy Duty 9500 LB Winch.
The included Barricade Winch is driven by a powerful 5.5 HP series-wound 12-volt electric motor. Featuring a rugged 3-stage planetary gear box with a 195.4:1 gear ratio, this Winch provides 9500 lbs of pulling power. Matched with a sliding ring gear clutch and a two-way automatic, in-the-drum braking system, you know you can always rely on this winch to hold your rig. A 4-way aluminum roller fairlead helps to reduce wear and tear on the included 21/64" steel cable. This Barricade Winch also includes a wired remote control with a 12 foot lead, allowing you to safely stand clear when in operation.Simple, Bolt-on Installation.
Barricade engineered their Bumper and Winch Combo Kit to be a direct bolt-on upgrade using just basic hand tools. There is no cutting or drilling required for a clean straight forward installation. With the help of a friend, installation can be completed in about 3 hours. Application.
This Barricade Off-Road Extreme HD Front Bumper and 9,500 lb. Winch w/ Steel Cable Combo kit is specifically designed for use on 2007-2018 Jeep Wrangler JK models. Line Pull Speeds
- 0 lbs. - 35.4 ft./min
- 2000 lbs. - 14.8 ft./min
- 4000 lbs. - 11.2 ft./min
- 6000 lbs. - 9.5 ft./min
- 8000 lbs. - 7.87 ft./min
- 9500 lbs. - 6.43 ft./min
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov