Review & Install Video
This clamp is going to keep your side arm very accessible at all times, and it's a very, very sturdy clamp. Today, we're going to talk through the installation of this clamp, which is a very simple one out of three wrench install. In fact, this is designed to be installed and uninstalled very easily to remove from one vehicle to the next. So, very easy install that'll take less than five minutes, and we'll talk more about that in just a second.Now, Condition Zero does make a very nice vehicle-specific mount for your JK. But if you have a TJ or a YJ or maybe you have multiple vehicles, and you want a clamp that you can very easily move around, this is gonna be a really nice option for you. Whether you clamp this to your center console, whether you clamp it to the map pocket in your door, really anywhere that you have an area that's two inches or less, you can attach this clamp to. It's fully adjustable, rotates 360 degrees, and is going to give you a very, very sturdy mount to put your side arm. So, whether you're law enforcement or you legally carry in your state as a citizen, this is gonna give you a place to keep your gun accessible when you're sitting in your vehicle without having to keep it on your purse.Condition Zero does make some very high-quality gun mounts and this one is no different. Even though this isn't vehicle-specific, it's not a permanent mount, it is still very, very sturdy, very solid, and very well made. And it needs to be if you are in a situation where you need to be able to quickly access your gun. You don't want the whole clamp falling off. You don't want it moving around. You wanna know exactly where it is, and you want it to stay put. And that's what this clamp is going to do for you. This comes with the clamp mechanism itself. Again, it's fully adjustable, rotates 360 degrees, so you can use it in a variety of different orientations. And it also comes with a universal holster as well that will fit anything from a full size down to a subcompact, and it does have a strap on the top for a little bit of retention as well.So like I said, the install's a very simple one out of three wrenches. It's going to take you five minutes or less to get this installed. It's really just one thumb screw that will tighten or loosen the clamp. All you need to do is figure out where you wanna get this thing mounted. Go ahead and loosen up the adjuster, tighten down the clamp, get the holster in the orientation that you want it, tighten up the adjuster, and then it's just a matter of putting your gun into the holster and you're finished. Again, this is designed to be a universal mount piece. You can move it around in your vehicle. You can move it from one vehicle to another. In fact, you don't even have to use this in your vehicle. If you want to pull it out, you can clamp it indoors somewhere as well. This has a lot of different uses.This clamp is going to run you around $110, and I don't think that's a bad price for what you're getting. Again, this is very solid. This is very well built and this can be mounted anywhere because it's fully adjustable. It also includes the holster with it that will fit any gun that you have. Or you can go ahead a custom mount your own holster on it if you choose to. But either way, I do think that the $110 price tag is worth it for the quality that you're getting.So that's my review of the Condition Zero Pistol Mount Clamp fitting your 1987 and up Wrangler that you can find right here at ExtremeTerrain.com.
The Condition Zero Pistol Mount Clamp provides a secure dock and holster for your hand gun that can be utilized anywhere, whether in your Jeep or under the tool bench. It also keeps your gun within easy reach and includes a universal holster perfect for hunters. It is compatible with a wide variety of handguns from small revolvers to automatic weapons.Durable Construction.
The Condition Zero pistol mount clamp is made here in the USA from sturdy materials to provide lasting, dependable use. It requires no special installation procedure and can be installed easily without any tools by simply twisting a knob.Application.
The Condition Zero pistol mount clamp is designed for universal application and is suitable for use in your 1987-2018 Jeep Wrangler YJ, TJ, JK and JL models.Please Read.
Please treat all guns as if they were loaded and follow all federal, state, and local laws regarding firearm possession and use.
- What's in the Box
- (1) Universal holster
- (1) Pistol clamp mount
- Installation Info
Installation Time: (approx) 1 Minute
Difficulty Level:Simple installation for anyone
- Tech Specs
- Will it fit my Wrangler?
- JK Rubicon 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Rubicon 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Wrangler 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
- JK Wrangler 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
- JL Rubicon 2 Door - 18
- JL Rubicon 4 Door - 18
- JL Wrangler 2 Door - 18
- JL Wrangler 4 Door - 18
- TJ Rubicon 2 Door - 03, 04, 05, 06
- TJ Rubicon Unlimited 2 Door - 05, 06
- TJ Wrangler 2 Door - 97, 98, 99, 00, 01, 02, 03, 04, 05, 06
- TJ Wrangler Unlimited 2 Door - 04, 05, 06
- YJ Wrangler 2 Door - 87, 88, 89, 90, 91, 92, 93, 94, 95