Win Two 2018 JL Wranglers! Enter Now
Talk to Wrangler Enthusiasts
1-844-887-6502
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping on Orders Over $75. Details

Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 2 Door)

Market Price $211.94 You Save 20% ($41.95)
Our Price

$169.99 (pair)

FREE Shipping
  • Item J102608
  • MPN# 14011

In Stock Ships same business day. Choose options to add to cart

Bushwacker Trail Armor Rocker Panel Rebate

Features, Video & Details

  • Rocker Panel and Sill Plate
  • Trail Proven Protection
  • Custom Styling
  • Durable Construction
  • Easy, No Drill Installation
  • OEM Matte Black Finish
  • Made in the USA
  • Limited Lifetime Warranty
  • Fits 2 Door Applications
  • For 2007 to 2017 Jeep Wrangler JK Models

Review & Installation Video

Review & Install Video

I'm Ryan from ExtremeTerrain.com and this is my review of the Bushwacker Textured Rocker Guard and Sill Plate, fitting all 4 door 2007 to 2016 JKs. This product is designed to protect your rocker panels and your sill plates from people getting in and out of the Jeep and either kicking the rocker, or stepping directly onto the sill. Those are two places that can take a lot of abuse and can easily have the paint scratched or rubbed off. This product takes care of both of those problems at the same time. This also does a really nice job of finishing off the otherwise unfinished pinch seam. A lot of people will try to install a factory-style Rubi rail just to cover the pinch seam on their Jeep and give the Jeep a more finished appearance. This does that same thing but it does it for less cost, it does it at less weight, and it also provides the sill protection which those factory-style Rubi rails do not. So for all those reasons, I really like this product. It seems to be really fairly priced for what you get. These are made of Bushwacker's Dura-Flex 2000 TPO material which is similar to the material that they make their fender flares out of. It's designed to be UV resistant so it shouldn't fade, and it should hold up pretty well for what these are designed to do. They're designed to install really easily onto the Jeep using the pre-installed 3M tape and some screws and J nuts that hold it onto the pinch seam. Now, as with a lot of other Bushwacker products, this is really complete. They include the alcohol prep pads that you need to clean the surface so that the 3M tape gets a good, strong bite. Now this is plastic and even though it goes on the rocker, it is not full-on rocker protection from rocks. You can't go off-road, drop your Jeep off a ledge onto the rocker and expect this to hold up. It absolutely will not. However, again, for what it's designed for, I think it does a really nice job, which is paint protection for the rockers and for the sills, as well as providing that much more finished look that the otherwise empty pinch seam just doesn't have from the factory. If you are somebody who takes your Jeep off-road and you need that stronger rocker protection, this mounts directly onto the pinch seam, but if you get a rocker guard that mounts onto the body mounts, you can probably mount this in conjunction with those stronger rocker guards. That'll be a pair that looks good, gives you paint protection and also off-road rock protection, and really is the best of both worlds. Like I said, this is designed to be completely bolt-on and the installation is really easy. Any time you're working with 3M tape, you want to make sure that the surface you're attaching the 3M to is really clean. And to do that you can use the included alcohol prep pads that come right in the kit. So the first thing is to wipe down the whole rocker guard and the sills of the Jeep. From there you can install the J nuts onto the pinch seam and loosely bolt these pieces onto the Jeep. Bushwacker has done a nice job at leaving the backing of the 3M nice and long so you can put those bolts into place. So grab onto the backing and slowly pull the backing out while you're pressing the piece onto the vehicle. Again, Bushwacker does a really nice job of thinking of all of those things when they design a product like this. The whole installation of these shouldn't take you more than 30 minutes to get done both sides, and you won't need any specialty tools to get it done. Like I said before, I think these are really fairly priced for what you get. You just have to remember what this is. This is paint protection and this is not rocker protection from dropping your Jeep off of a ledge onto a rock. But if you know that and you're buying them for paint protection, they'll get the job done better than a lot of other products that I've seen on the market, and they are priced fairly. So if you're looking to finish off the pinch seam on your Jeep and also add some protection for the paint on your rocker guard and your sills, this product will do all of those things and do it well. This is a nice, easy installation and Bushwacker has been able to design a product that works great and does it at a low cost. So that's my review of the Bushwacker Textured Rocker Panel and Sill Plate fitting all 4 door 2007-2016 JKs, that you can find right here at ExtremeTerrain.com.

Custom Styling. Upgrade your JK to a custom look with Bushwacker's Trail Armor Rocker Panel & Sill Plate Combo Pair. This set of trail armor includes tough rocker panel covers with a built-in entry guards to prevent damages to your paint from trail hazards as well as passengers. They feature a handsome OE matte finish to complement your Wrangler's factory textures for a custom look without a hefty price tag.

Extreme Construction. This JK rocker combo kit is proudly made in the USA from Bushwacker's own Dura-Flex 2000 TPO for extreme durability and protection. Their material is 100% UV protected to prevent unsightly fading and chalking like cheaper options available on today's market.

Installation and Warranty. Trail proven to protect, these rockers panels attach easily with included automotive grade 3M tape for a secure fit. Bushwacker backs this kit with their lifetime limited warranty, providing you with full security and value for the life of your JK.

Application. The Bushwacker Trail Armor Textured Rocker Panel & Sill Plate Pair are designed for use on 2007-2017 Jeep Wrangler JK 2 door models including Rubicon models.

Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Details

What's in the Box
  • (1) Driver side rocker guard and sill
  • (1) Passenger side rocker guard and sill
  • 3M tape
Installation Info
Will it fit my Wrangler?
  • JK - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • JK Rubicon - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17

People Who Bought This Item Also Bought

Most Helpful Reviews

2/5
Not a tight fit

I had installed some sliders that required removing the stock sliders off, revealing the pinch seam, and was looking to cover them up with a nice, finished look. I took an hour to remove my sliders ...

Read More
Helpful (2)

5/5
They do the trick

Easy to install , should fit with most Nerf bars and steps.

Helpful (1)

Overall Rating 4.1 out of 5 stars
Read All 27 Reviews

Customer Photos

You Might Also Like

8 Questions / 6 Answers

Ask a Question

Well these work with Barricade Extreme HD Rocker Steps (07-17 Wrangler JK 4-Door)?

Jay

  • No, the Bushwacker Textured Rocker Panel & Sill Plate will not install with the Barricade Extreme HD Rocker Steps since they use some of the same mounts.

    XTHelenW

Helpful (0)

From another question above I can see that these won't fit with the Rubicon rock rails. Is this also true for Rubicon Recon? The Rubicon Recon has different rock rails (it appears) than the base Rubicon.

RonL

  • The Bushwacker Textured Rocker Panel & Sill Plate would interfere with the rock rail/step bar combo installed on the Rubicon Recon.

    Rob D

Helpful (0)

Will this work in conjunction with side steps? It doesn't say. And also, do you have it for a 4 door?

JenG

  • Yes, the Bushwacker Textured Rocker Panel & Sill Plate will work with any side steps or rocker guards that are mounted only in the frame. Anything that mounts into the pinch seam of the Jeep will not work with this set up. We do offer it for the 4 door as well, you can find it here: https://www.extremeterrain.com/bushwacker-rockersill-armor-jku-14012.html.

    XTHelenW

Helpful (0)

It looks like these would install and still allow for mounting Smittybilt SRC side armor step rails on my 2 door 2017 Wrangler Sport ........... do you agree or see any issues?

DaveL

  • I believe your SRC side steps should mount into the pinch seam and the frame. Unfortunately anything that mounts into the pinch seam will not work with the Bushwacker Textured Rocker Panel & Sill Plate. If your side steps are only frame mounted these will work along side of them!

    XTHelenW

Helpful (0)

Will these cause the rockers to rust from the road salt in Minnesota?

Mitchell

  • These are made from Bushwackers Dura-Flex 2000 TPO which will not rust.

    XTHelenW

Helpful (0)

Will these panels work with the Amp Power Steps? Thanks

Cody

  • Hello, unfortunately we have not test fitted these with the AMP Power Steps, so we wouldn't be able to guarantee fitment.

    XTNunoP

Helpful (0)

More Products You Might Like

Customer Reviews (27) Write a Review

Overall Rating 4.1

out of 5 stars

Installation Time:Less than 1 Hour

  • Protection 4.31579 4.3
  • Fit 4.222222 4.2
  • Appearance 4.666667 4.7
  • Bang For Your Buck 4.037037 4.0



  • 2/5

    Installation Time: Less than 1 Hour

    August 03, 2016

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Not a tight fit

    I had installed some sliders that required removing the stock sliders off, revealing the pinch seam, and was looking to cover them up with a nice, finished look. I took an hour to remove my sliders and install these exactly as the instructions said, only to find that they pulled away from the body at the front and the back. This left a good deal of space between the rockers and this product, which would leave a lot of space for rocks, salt, etc. to get stuck.

    Brett

    Year: 2016Submodel: Wrangler Unlimited

    Helpful (2)

  • 2/5

    Installation Time: Less than 1 Hour

    July 02, 2017

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Installed bushwhacked rocker panel

    Installation was reasonably easy but unless you take exactly the right steps you end up with a gap at the front and rear of the guard. They do look nice but I am concerned with salt and water getting behind them and causing premature rust. I did as the directions told you but fit is not as good as I would like. If you installed a pair first I am sure you would end up with a better fit the second time.

    DougC

    Year: 2014Submodel: Wrangler

    Helpful (1)

  • 5/5

    April 21, 2017

    They do the trick

    Easy to install , should fit with most Nerf bars and steps.

    MichaelE

    Year: 2017Submodel: Wrangler

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    April 15, 2017

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    What I was looking for

    This are a little pricey,but the were what I was looking for. I wanted to protect my paint and Finnish off the pinch seam and this accomplished that. Easy to install nothing special needed.

    JacobM

    Year: 2016Submodel: Wrangler

    Helpful (1)

  • 1/5

    Installation Time: Less than 1 Hour

    March 01, 2017

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    plastic

    cheap and they don't fit very well.There is excess plastic going past the pinch seem.they do not fit tight against body there are gaps for water to enter.over priced.they look good from a distance.i will probably get something a lot more sturdy an better quality.

    Al

    Year: 2017Submodel: Wrangler

    Helpful (1)

  • 3/5

    Installation Time: Less than 1 Hour

    August 01, 2016

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Good Fit, could be better

    The sill plate guards are a great fit. The only issue I see is the length of the rocker panel section. It is not an exact fit to jeep. I live in the great lakes region and get a lot of snow in the winter. I can see the rocker panel part catching and holding snow and road salt against the body. If this part was shortened up about half an inch it would be perfect.

    WNYJEEP

    Year: 2016Submodel: Wrangler Unlimited

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    July 29, 2016

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Good look and fit but some quality issues.

    I really like these rocker panel * sill plate protectors overall. Install took me longer than advertised because I had to lower my armor/steps to get access to the screws at the pinch seam. I would have give them five stars except the product had a few quality control issues: I had to clean up burrs on the plastic edges and there were some kinks in the edges that needed to be flattened. And the "Bushwacker" label was installed upside down! (I removed them so no big deal). Tape quality is questionable but holding OK after the first week.

    OscarMike

    Year: 2016Submodel: Wrangler Unlimited

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 04, 2016

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Great product!!!

    My wife and I really like the stock look. It goes on real easy and leaves the jeep with a nice sleek look. If your sill edge is all scratched up this will cover it and leave it looking nice and clean.it only took about twenty minutes to install.

    Shigid1

    Year: 2011Submodel: Rubicon Unlimited

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    June 29, 2016

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Love it!

    Love the Rocker Panel and Sill Plate. I have a 4 door jeep and wanted to protect the door sills from normal wear and tear. The quality and color were exactly what I was looking for. It took my husband and I just under an hour to install due to having to remove the running boards inorder to attach the panel and sill, then reattaching the running boards on top of the plates. It was worth it. Looks amazing.

    Truki

    Year: 2016Submodel: Wrangler Unlimited

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    June 11, 2016

    Bushwacker Rocker panel Guards

    We got them to give a surface for people to step on when getting in and out of back seat without slipping on the metal. Looks great, easy to install. I just don't like the advertising of "Bushwacker" logo on the parts, but its not too big

    Jeep19350

    Year: 2016Submodel: Wrangler

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    September 19, 2015

    Rocker panel/sill plates

    First off, I had to call and see if this item would fit my Jeep. The catalog and online said it went up to 2014. Mine is a 2015. The sales rep, Carl wasn't quite sure, but made sure that it would before I bought it. Second, got the parts in a timely manner and they look amazing! I love the fact that they match the fenders on the Jeep. I am 100% happy with my purchase and your company. Thank you so much!

    kzmo1999

    Year: 2015Michigan

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    September 14, 2015

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Good rocker panel for looks

    I love the rocker and sill protector by bushwacker. I was having a major issue with the scratches I continued to create getting in and out of my jeep constantly. Now the sill protector has helped to hide those numerous scratch I created. I also like how the product has hiden some of the underbody giving the jeep a mor factory look. I don't really care for the 3m tape I'm afraid that later with weather wear it will have to be reinstalled in the future.

    Tvinson0812

    Year: 2013Manhattan, KS, USA

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    August 10, 2015

    Great protection for you rocker panels

    Easy install. Easy to follow directions. Only wish the bottom of the guards covered the bottom seam a little better. Overall pleased with the product.

    abaker1

    Year: 2015Zanesville, OH 43701, USA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    May 02, 2015

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    good product for the money

    Needed something to protect the sills, seen these decided to try them out. I like they cover the sills all the way down to the seams. Saves me from having to spray them. Overall i love them.

    cwewasson

    Year: 2014Lac du Flambeau, WI, USA

    Helpful (1)

  • 4/5

    October 05, 2017

    Sill Plates

    looks good and will protect from getting scratches. Also goes with color Black/White. combo. Lookin Good

    PatrickS

    Year: 2017Submodel: Wrangler

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    September 07, 2017

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    worth buying

    I like the look of these, looks better than stock rock rails, and like that they have the sill plate attached to them all in one piece. They were easy to install by your self but I think you would be better off having a second set off hands to help. The only thing I did not like is the 3m tape does not hold in some of the places like at the top of the piece between the doors and the front top edge. Just wish it was a little cheaper in price, but other wise was worth buying for me aleast

    WarrenH

    Year: 2017Submodel: Wrangler

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 04, 2017

    Great protection.

    Easy to install. Great protection. Love it has the Jeep logo. Best deal I found.

    GGHadid

    Year: 2017Submodel: Wrangler

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 01, 2017

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Necessary

    Easy to install. Very necessary for proper protection.

    SueC

    Year: 2017Submodel: Wrangler

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    August 22, 2017

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Clean look

    A nice clean look, especially if you don't have running boards. Fit could be better at the ends, adding more tape helps some. The logo makes it not fit flush with the panel.

    J

    Year: 2017Submodel: Wrangler

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    August 05, 2017

    Review from Bushwacker Textured Rocker Panel & Sill Plate - Pair (07-17 Wrangler JK 4 Door)

    Easy Install, looks nice

    I received these in the mail and the installation screws and "U" clips were not provided. Extreme Terrain sent them out and I received them a week later. I made sure to prep everything first and the install was a breeze. I gave a 4 for protection because it seems like water and debri could potentially get behind them and cause an issue. I would not recommend these for someone who does serious off-roading. I just use them to keep my daughters shoe marks off the paint. They are a bit expensive for two large pieces of molded plastic. They should be about less than $100.

    RichardL

    Year: 2017Submodel: Wrangler

    Helpful (0)

Related Wrangler Categories