World-Class Performance. Use this Belltech Suspension Lift Kit to upgrade your Wrangler and unlock its full off-road potential. Offering an impressive 4-Inch lift, this lift kit will sort out your Jeep’s nose-down factory stance and give you ample ground clearance to prevent bottoming out scenarios when you’re off-roading in the middle of nowhere. What’s more, the added performance doesn’t come at the cost of drivability or usability. Your Jeep will behave exactly like factory on pavement.
Premium Coil Springs. This Belltech lift kit includes front and rear dual rate coil springs. What makes these springs unique is their two-stage design. The first stage of the spring is there to offer a soft ride but can extend when needed for additional wheel travel. The second stage deals with the Wrangler’s payload and is in charge of addressing large and sudden impacts, especially at higher speeds over rocky or bumpy sections.
Street Performance Shocks. Since this is a premium lift kit, it also includes four Street Performance Shocks from Belltech. Using a 15mm piston rod, 35mm piston, and a 55mm shock body, these shocks were carefully engineered to be able to withstand the use and abuse that goes along with hardcore off-roading. They feature internal Teflon-coated bushings and piston seals that avoid metal-to-metal contact, reducing unwanted heat and increasing longevity. These shocks do an amazing job of reducing body roll despite the increased center of gravity, giving your Wrangler an OEM feel.
Adjustable Control Arms. When raising or lowering a vehicle you’re inevitably changing its wheel camber. Too much positive or negative wheel camber is never a good thing as it can cause excessive tire wear and all kinds of weird handling issues. Since this kit offers 4 Inches of lift, to address the change in camber it also comes with front and rear adjustable lower and upper control arms. You also get adjustable track bars that will correctly position the axle and prevent excessive stress on the driveline and the suspension system. This kit will clear 35 Inch tires with no or minimal fender trimming.
Installation Process. If you’ve got a set of hand tools and some basic mechanical knowledge you can probably install this lift kit in a few hours. Professional installation is recommended though if you’re not confident you can install this kit yourself.
Application. This Belltech 4 Inch Suspension Lift Kit fits all 2018-2021 Jeep Wrangler JL models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov