Ideal mounting height of aftermarket 3 link suspension system
Truss spans approximately 26.5"
Interlocked 10 gauge thick dimple died gussets
Fits 2007-2018 Jeep Wrangler JK w/ a JK Rear 44 Axle
Artec Rear Axle Truss. A broken axle is one of the off-roader's worst nightmares. Artec has come up with a solution to this problem with the rear axle truss. What they offer is a heavy duty truss system designed to take serious abuse and reinforce your axle. Using CNC technology, you get a precision cut truss that will fit your vehicle.
Adding Structural Integrity. Artec created a low profile that leaves the axle stronger, sleeker and less likely to interfere with other vehicle components. This rear axle truss provides a flat surface to mount upper control arms in a 4-link set up. The 1/4" thick truss top will strengthen the axle and delivers a low profile link mounting surface. The base truss itself spans about 26.5 inches across the center of axle.
Installation. In order to have this Rear Axle Truss by Artec Industries installed, general welding and fabrication skills will be required.
Application. The Artec Industries Rear Axle Truss will work with all 2007-2018 Wrangler JKs equipped with JK Rear 44 Axle. Trimming is required for fitment on other centered rear 44 axles.
Please Note. The Jeep JK Rear 44 has a 16.375" centered differential housing and 3.25" axle tube diameter. Other 44 application will have different measurements and diameters. Check your axle measurements prior to ordering to ensure proper fitment.
Ryan H, 1998 Jeep Wrangler TJSocial Marketing I’ve always been into cars of all kinds but I really fell in love with my Jeep. My Jeep was my first vehicle, and first and only Jeep so far but I know there will be others. The fact that there is nothing on the road that it can be confused with is what drew me to it. The sense of community and the ...