Installation Time: Afternoon
January 21, 2016
Raxiom LED Headlights 2015 JKUR
True to the review that others as well as ET have mentioned, this set up is a true plug and play installation. Remove the grille, turn signals and headlight bezels. Then, unclip the factory lights and remove. *Note: These headlights will require extensive aiming before use. Remove the plastic housing with an end wrench or adjustable wrench and order two headlight adjustment screws from a Jeep Dealership. Cost ~$2.50-3.50/item. There is a helpful video on YouTube "How to Aim Jeep Headlights". After removing and installing the plastic housing holding the headlamp assembly, you may reinstall the lights by attaching the Raxiom harness. I did not have looseness described by others, but you may reinforce the connection if necessary. Carefully re-aim the headlights to your preference. As mentioned before, there IS flicker with high beam, but no delay. The high beam, as mentioned before, does leave a bit more to be desired. It enhances the focused area of the low beam and add a bit more spread +/- %10. The low beam is bright, clear, white, with no flicker and a broad pattern with distinct focus at the center of the beam. Overall, the install is over one hour with proper and necessary aiming. The improvement is worth the price. There is a improvement in safety and importantly style. The assembly is very well constructed, sealed and DOT approved. Despite flicker and lack of high beam efficiency. This product represents a compromise between J.W. Speaker headlights, other top brand headlights and certainly a legal, warranteed, and quality product over imitation brands. Overall, I would recommend this product.