- Universal application
- Bare steel
- Designed to be used in one of 4 different configurations
- laser cut from 5/16 high strength steel plate
- Sold Individually
The BTF Track Bar (Panhard) Bracket was designed for those of you building a 3-link front suspension system with a steering-gear box. This bracket is was designed to be used in one of 4 different configurations. It can be used full-length to achieve a 5 1/2 drop from the bottom of the frame or it can be trimmed all the way down to achieve a 2 drop. This bracket is laser cut from 5/16 high strength steel plate. We recommend that the bracket be gusseted along the outside if it is used in its full-length form. It could also be used on the inside of the frame rail if required. Sold individually. Manufacturer Part Number (MPN):
- Blue Torch Fabworks 3093
