- Universal application
- Bare steel
- Laser cut from 1/4" high-strength steel plate
- Measures 3" across the flat bottom and is 2" from the flat bottom to the center of the bolt hole
- Sold individually
The BTF Flat Bottom Coil Over Tab is laser cut from 1/4 high-strength steel plate. The tab measures 3 across the flat bottom and is 2 from the flat bottom to the center of the bolt hole. The bolt hole is 1/2. This tab is perfect for a lower shock mount when you need to get the coil over as close to the axle as possible. It also allows the bolt to be installed perpendicular to the axle tube as it should be for axle articulation. This tab can also be used as an upper shock mount when you are mounting off the bottom of a tube or flat surface.
Manufacturer Part Number (MPN):
- Blue Torch Fabworks 3039
